Utility Brain

Read your gas meter with an SDR

Many US gas meters have a battery-powered Itron ERT module bolted to the index, usually a gray or white box with a label giving its ID. It broadcasts the meter's reading on the 900 MHz ISM band for drive-by trucks or fixed collectors. The open-source programrtlamr and a $30 RTL-SDR dongle can receive it.

Will it work on my meter?

  • Itron gas ERTs (40G, 100G and relatives) on drive-by or fixed-network AMR are the usual case. rtlamr's own author tested it on a 40G.
  • Gas modules on two-way AMI networks (Sensus FlexNet SmartPoint, Itron 500G on a mesh, Aclara RF) talk to the utility's network, and a consumer receiver generally can't use them.

Gas modules in our catalog that rtlamr decodes: Itron, Inc. 40G gas ERT, Itron, Inc. 100G gas ERT (DLN, DLS, DLT), Itron, Inc. 20G / 25G gas ERT (incl. 25G remote), Itron, Inc. 40GB gas ERT (and 40GB Remote), Itron, Inc. 100T / 100T-CP cathodic protection telemetry ERT.

Receiving it

rtl_tcp &
rtlamr -msgtype=scm,scm+ -format=json -filterid=<your module id>

The consumption value is the meter's index in its own units. On most homes that's cubic feet, or hundreds of cubic feet, matching the digits on the dial. Your bill converts volume to therms with a heating-value factor printed on the bill.

What you get

  • The register advances in whole units, so short-term flow comes from the change between readings.
  • Battery modules transmit on their own schedule. You only listen; nothing is sent to the meter.

The same setup reads electric ERT meters and Neptune R900 water meters. See the electric meter guide.

Get live readings from your own meter

We are building Utility Brain, a small receiver that reads your electric meter the way your utility does and shows your usage minute by minute. Join the list and we'll tell you when it works with your meter.

We only use this to tell you about Utility Brain. Privacy.